Tag Archives: stinger

The Story of Stingers

Lots of animals and even some plants can sting. In this post, I’m going to limit myself to one specific group of stinging animals — the insects. All stinging insects are in the order Hymenoptera, which includes sawflies, wasps, ants, and bees, so I’ll be further limiting myself to that order. As we’ll see, it won’t be much of a limitation.

A lot of things about stinging insects may surprise you. For starters, they’re all female. That’s right, no male insect can sting. The reason is simple — stingers evolved from ovipositors. And what’s an ovipositor, you ask? Well, consider the word. ‘Ovipositor’ comes from the Latin ōvum (“egg”) and positor (“one who deposits”).1 An ovipositor is a tube through which an insect lays eggs.

A Few Examples

Ovipositors come in all sizes and a surprising variety of shapes. Some are short and fat; some are so long and thin that you wonder how they can possibly work; some are serrated so that their wielders can saw into a leaf or stem and deposit their eggs inside.

Jumping bristletails — One of my favorite examples is the jumping bristletail. These are insects in the order Archaeognatha,2 an ancient group first appearing in the fossil record in the Devonian, well over 358 million years ago.3 They’re called jumping bristletails because when a bristletail is threatened, it snaps its abdomen against the ground, causing the insect to jump up to four inches (10 cm). Modern bristletails have no wings, and none of their ancestors did, either. The group actually predates the evolution of wings in insects.4

A bristletail (order Archaeognatha)
Mission Trails Regional Park, San Diego County. 7/31/17

The reason bristletails are one of my favorite examples of ovipositing insects is simply that I have some cool videos of them laying eggs. Here’s one of them.

Parasitoids — A parasitoid is a parasite that kills its host. Many, many species of wasp are parasitoids. One example is shown below. It’s a carrot wasp in the genus Gasteruption, family Gasteruptiidae. Wasps in this family are called carrot wasps because the adults often feed on pollen and nectar from plants in the carrot family.

Parasitoid wasp (Gasteruption sp.)
Chimoio, Mozambique April 2010
Author: Ton Rulkens from Mozambique
This file is licensed under the Creative Commons Attribution-Share Alike 2.0 Generic license.

The larvae of carrot wasps prey on other wasps or bees. When an adult female wasp finds a bee or wasp nest, she will tap the cells in the nest with her antennae, trying to detect the presence of a larva by the vibrations. When she finds an occupied cell, she punctures the seal with her ovipositor and deposits an egg. When the egg hatches, the wasp larva eats the food left for the original inhabitant, or the original inhabitant, or both.5 6

The photo below shows a wasp in the genus Apocrypta. These are parasitoids of certain species of fig wasps. The larvae of fig wasps develop inside figs. The parasitoid has to drill through the thick outer wall of the fig and root around inside the fruit to find the larva it wants to parasitize. Hence, the absurdly long ovipositor.7

A parasitoid fig wasp (Apocrypta sp.)
Author: Nikhil More
This file is licensed under the Creative Commons Attribution-Share Alike 4.0 International license.

Katydid — The insect in the next couple of photos is a least katydid (Brachyinsara hemiptera)8. This insect’s ovipositor has serrations for sawing. Katydids deposit their eggs in a variety of substrates, depending on the species. Since the one pictured here has serrations on its ovipositor, I would guess that it deposits its eggs inside a leaf or stem. I know this is true of another species of katydid, Scudderia furcata. This katydid curls its abdomen underneath itself and uses its ovipositor to saw into the edge of a leaf between the inner and outer layers and deposits its eggs inside. If you’re having trouble visualizing how this would work, click here to visit a website that has a nice photo of a Scudderia furcata in the process of laying eggs. The leaf in the photo is very thin, which means that the eggs the katydid is inserting must also be very thin. In fact, they’re so thin as to be almost transparent — one more example of a mind-blowing evolutionary adaption.9

Least katydid (Brachyinsara hemiptera)
Mission Trails Regional Park, San Diego County 11/7/18
A closeup of the ovipositor. Note the tiny serrations on the right edge.

Cricket — The ovipositor of this tropical house cricket (Gryllodes sigillatus) wins the prize for simple elegance and refinement. It looks remarkably like a hypodermic needle.

Tropical house cricket (Gryllodes sigillatus)
La Mesa 12/12/20
This was an escapee from a box of crickets that I got from a pet food store, so who knows where it originated.
A closeup

The cricket simply inserts her ovipositor into soft ground and injects an egg. Click here to watch a video of some crickets ovipositing.

The Evolution of Ovipositors10 11 12

Earlier, I described the ovipositor as a tube. This is true enough, however, it’s not a simple, one-piece tube like a straw. It consists of a number of separate parts that come together to form a tube-like structure. Often, when an insect dies, those parts will separate, splaying out behind the body.

The reason ovipositors are not simple tubes can be traced back to their evolutionary origins. Insects (and, ultimately, most other animals, with a few exceptions like sponges and jellyfish) are descended from annelid-like ancestors. Annelids are segmented worms. Some annelids, like earthworms, have no legs, but many annelids have a pair of legs attached to most of their body segments. The photo below shows a fairly typical annelid — a type of polychaete worm.

Bloodworm (Glycera sp.) — a type of annelid
North Inlet – Winyah Bay National Estuarine Research Reserve.
Author: Unknown
Source:
http://www.photolib.noaa.gov/htmls/nerr0328.htm

This image is in the public domain because it contains materials that originally came from the U.S. National Oceanic and Atmospheric Administration, taken or made as part of an employee’s official duties.

Most of the segments in an annelid’s body have the same sets of internal organs and are essentially identical. (Of course, there are some organs, like parts of the digestive tract, that necessarily span multiple segments.) This basic body plan is easily modified by natural selection. Segments can be added or dropped, and legs can be modified to form other types of appendages, such as antennae, mouthparts, and genitalia.

In the case of ovipositors, some of the appendages evolved to work together to form mechanisms for guiding the eggs as they leave the body. Sometimes additional appendages evolved to form a sheath around the ovipositor to protect it when not in use. This sheath will part to expose the ovipositor when the insect is ready to lay eggs.

I was able to find one scientific paper that describes in detail the stingers of a honeybee and a paper wasp. You can click here to access the entire paper. The images in the article (mostly electron microscope images) show the structure of the stingers. In both species, the stinger consists of a wide ‘stylet’ and two ‘lancets’. The lancets ride on two ‘rails’ that run along the stylet. When the insect stings, it moves the lancets rapidly back and forth in opposite directions for a short distance along the rails. This helps the stinger penetrate the substrate. The venom is pumped down the trough formed by the stylet and lancets. In the case of the honeybee, the venom exits the stinger through the space between the ends of the lancets and stylet. In the wasp stinger, the venom exits through an opening in the stinger much nearer the base. (I don’t know why this opening is so far from the tip in the case of the wasp. It seems like this would make it harder for it to inject venom, since it would have to almost completely bury the stinger first. But that’s apparently how they do it.)13

The images in the paper are a bit difficult to interpret. Another paper that it references has some images that are easier to understand. Click here to see one of the photos from it. You can see click here to see an abstract of the paper (and some more photos).

Insects have evolved endless varieties of ovipositors. To mention just one more example, according to Wikipedia, “In some species [of wasps], such as Apocrypta westwoodi, the ovipositor has zinc-hardened drill bits”.14 ‘Endless varieties’ really isn’t much of an exaggeration.

The Rise of Wasps

As we have seen, an ovipositor can be used to inject an egg into a substrate. Often that substrate is the ground, a leaf, or the stem of a plant. But it could also be another insect or even a mammal. Over the course of time, many insects have evolved to be parasitoids, laying their eggs near, on, or inside a host.

Many different kinds of insects, including flies and even some beetles,15 have produced parasitic species, but the undisputed masters of parasitism are the wasps. Most people would be astonished to learn just how many different kinds of wasps there are. And most of them are parasites. Many entomologists believe there are more species of parasitoid wasps — just parasitoid wasps — than there are beetle species. This seems hard to believe, since we see a lot more beetles than we do wasps. The reason for this seeming paradox is that the vast majority of wasps are very tiny, so they don’t get noticed very often. For a long time, scientists believed that beetles (order Coleoptera) were the most diverse of the insects, but as time passed, more and more minute species of wasp were discovered. Eventually, it become clear that for just about every species of beetle there was probably at least one species of wasp that was evolved to parasitize it. In fact, according to entomologist Lynn Kimsey, “…for each beetle species there are probably at least two wasp parasitoids: One [that targets] the eggs and one [that targets] the larvae.”16

Before we get too much further along, I should take a moment to explain just what I mean by ‘wasp’. As mentioned at the beginning of this article, the order Hymenoptera includes sawflies, bees, wasps, and ants. The order is further divided into two groups or clades17 — Symphyta and Apocrita. The members of Symphyta are called sawflies. Their main defining characteristic is the lack of a ‘wasp waist’ — instead, the junction between the thorax and abdomen of a sawfly is thick and relatively inflexible. Apocrita, on the other hand, includes all the members of Hymenoptera that do have wasp waists, namely ants, wasps, and bees. The point of having a wasp waist it that it allows the insect to move its abdomen independently of the rest of its body, which can be useful in all sorts of ways, such finding a vulnerable spot to sting an animal.

Now, you may be wondering why I’m covering all the Hymenoptera here, instead of just focusing on the subset of the Apocrita that make up the wasps. Well, it’s because things aren’t quite that clear cut. ‘Wasp’ is not a scientific term. It’s a popular name that’s used for a lot of different members of Hymenoptera, including some of those in Symphyta. Wood wasps (family Xiphydriidae), for example, are technically sawflies.18 I’m not a professional entomologist, but from my reading, I get the impression that the professionals tend to use the term ‘wasp’ rather flexibly — sometimes using it to refer to anything in Hymenoptera, other times using it in a more conventional sense. Both ants and bees, by the way, evolved from wasps (in the narrower sense of the word), so from a scientific perspective, I suppose they are just special types of wasps.19 20

The Bizarre World of Parasitoid Wasps

Let’s take a look at a few more examples of parasitoid wasps.

Darwin or ichneumon wasps21 22 — These are wasps in the family Ichneumonidae — one of the most diverse of all animal families. Almost all ichneumon wasps parasitize spiders or the immature stages of holometabolous23 insects. Typically, an ichneumonid wasp will sting a caterpillar, injecting an egg in the process. When the egg hatches, the wasp larva proceeds to dine on the caterpillar’s organs. Apparently, it does this very selectively, however, because the caterpillar continues to go about its development and eventually constructs a chrysalis in which it pupates. The wasp larva also pupates, still inside the caterpillar’s body. Eventually, an adult ichneumonid wasp emerges from the chrysalis. (The caterpillar does not.)

The term ‘ichneumon wasp’ is sometimes used to refer specifically to members of the genus Ichneumon within the Ichneumonidae, so it can cause a bit of confusion. For this reason, some entomologists have suggested that ‘Darwin wasps’ would be a better common name for the group. The reason they picked this name is because of a quote from Charles Darwin in which he expressed the profound horror that the ichneumonid lifestyle engendered in him:

“I cannot persuade myself that a beneficent and omnipotent God would have designedly created the Ichneumonidae with the express intention of their feeding within the living bodies of Caterpillars…” – Charles Darwin in a letter to a friend, 1860

Seems a bit perverse to name a group of insects after a guy who was horrified by them, but he’s not around to argue.

Here’s a couple of photos of a Darwin wasp in the subfamily Pimplinae. Note the very long antennae. This is one of the defining features of the family.

An ichneumonid wasp (subfamily Pimplinae)
San Diego County 8/18/19
Another view

Braconid wasps24 — The family Braconidae is the second largest family in the order Hymenoptera. Braconids are mostly internal or external parasitoids of a wide variety of insects — usually beetles, flies, moths, or butterflies.

Here’s some photos of a braconid wasp in the subfamily Braconinae.

A brachonid wasp (subfamily Braconinae)
San Diego County 3/31/18
A brachonid wasp (subfamily Braconinae)
San Diego County 3/31/18

The next couple of photos show a jaw wasp (subfamily Alysiinae, also in family Brachonidae).25 The wasps in this genus are internal parasitoids of flies, ovipositing either into the fly larva or its egg. Yes, you read that right, some wasps lay their eggs inside the eggs of other insects! Not surprisingly, jaw wasps tend to be very small, usually less than 5 mm long. The wasp in these photos is sitting on a liverwort, so, if you happen to be familiar with liverworts, this should give you some idea just how tiny these wasps are.

Jaw wasp (subfamily Alysiinae)
Mission Trails Regional Park, San Diego County 2/12/19
Jaw wasp (subfamily Alysiinae)
Mission Trails Regional Park, San Diego County 2/12/19

Hyperparasitoids — Parasitoids, as we’ve seen, have rather gruesome lifestyles. But parasitoids have their own problems, such as other parasitoids. Believe it or not, quite a few wasps are parasitoids of parasitoids. In other words, they are hyperparasitoids!26

The following photo shows some cocoons of an unidentified braconid wasp. Braconid wasps, as we have seen, are parasitoids. But it wasn’t braconid wasps that came out of these cocoons. Instead, tiny conuran wasps emerged, having devoured the original occupants.

Cocoons of a braconid wasp
San Diego County 062817

Conura is a genus in the family Chalcididae. Chalcididae is itself in the superfamily Chalcidoidea. Wasps in this superfamily are called chalcid wasps, and they often have a greatly enlarged hind femora (one of the leg segments), with a row of teeth on the lower margin. You can see this in the next photo, which shows one of the wasps that emerged from the cocoons.27

Most of you are probably familiar with aphids — those tiny, sedentary insects that spend their lives sucking sap from plants. Aphids have many enemies, but some of the most unsettling are the parasitoids. These wasps lay their eggs inside aphids. The larva develops inside and eventually pupates, usually still inside. At this point, the aphid is, mercifully, dead, and its body has been turned into a “mummy”. The body of a mummified aphid is swollen, papery, and brown, tan, or blackish in color, depending on the species of wasp that parasitized it. After the wasp metamorphoses into an adult, it chews its way out of the aphid, leaving a gaping hole in the aphid’s body.28

An aphid mummy
San Diego County 5/18/18
An aphid mummy
San Diego County 5/18/18

The wasp that parasitized these aphids was probably a braconid, but it wasn’t a braconid that came out. Instead, the parasite was itself parasitized by a wasp of the genus Pachyneuron in the family Pteromalidae.

A hyperparasitoid wasp (genus Pachyneuron, family Pteromalidae)
San Diego County 5/18/18
Another view

While we’re on the subject of parasitoids, I should mention what’s probably the weirdest type: adelphoparasitoids. These are tiny parasitic wasps in the family Aphelinidae. The females are parasitoids of whiteflies or scale insects, but the males of some species are hyperparasitoids of the females of their own species and sometimes even of other males!29

Fairyflies or fairy wasps (family Mymaridae) — Fairyflies are some of the most common wasps, but you’ve probably never seen one. They are unbelievably tiny. Most of them are between 0.5 and 1.0 mm (0.020 to 0.039 inches) long. All known fairyflies lay their eggs inside the eggs of other insects, which accounts for their small size. As you can see in the following photo, they have very strange, feathery wings.30

A fairyfly (Mymar sp.)
New Zealand
Author: S.E. Thorpe
License (as per the author): I, the copyright holder of this work, release this work into the public domain. This applies worldwide.
In some countries this may not be legally possible; if so:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.

Included within the fairyflies is the smallest known insect, Dicopomorpha echmepterygis. The males are blind and wingless and are about 40% smaller than the females (so it’s the male that’s the smallest insect). Their body length measures 186 μm, based on eight specimens. This makes them smaller than some species of Paramecium and amoeba. In other words, they are smaller than some single cells! 31

The smallest known insect — a male Dicopomorpha echmepterygis
Source: e
Huber J, Noyes J (2013). “A new genus and species of fairyfly, Tinkerbella nana (Hymenoptera, Mymaridae), with comments on its sister genus Kikiki , and discussion on small size limits in arthropods“. Journal of Hymenoptera Research 32: 17–44. Pensoft Publishers. DOI:10.3897/JHR.32.4663.
Authors: John T. Huber, John S. Noyes, J. Read
This file is licensed under the Creative Commons Attribution 3.0 Unported license.

The fairyflies also include the smallest known flying animals. These are wasps in the genus Kikiki. The genus includes a single species, K. huna, which is found in Costa Rica, the Hawaiian Islands, Trinidad and Tobago, Argentina, and India. It’s very likely that they’ve been spread by humans, probably by stowing away on boats. The females range from 158 to 190 μm. Very few males of the species have been studied. The one measurement of a male put it at 235 μm. It’s believed that the females of K. huna represent the smallest that an insect can get and still retain the ability to fly.32 33

The smallest known flying insect — Kikiki huna female
Source: Huber J, Noyes J (2013). “A new genus and species of fairyfly, Tinkerbella nana (Hymenoptera, Mymaridae), with comments on its sister genus Kikiki , and discussion on small size limits in arthropods“. Journal of Hymenoptera Research 32: 17–44. Pensoft Publishers. DOI:10.3897/JHR.32.4663.
Authors: Huber J, Noyes J
This file is licensed under the Creative Commons Attribution 3.0 Unported license.

Hyperhyperparasitoids? — If you’re like me, when you first learned about hyperparasitoids, your natural reaction was “So are there any hyperhyperparasitoids?” — that is, parasitoids of parasitoids of parasitoids? Apparently, the answer is yes. I don’t know if there are any parasitoids that parasitize only hyperparasitoids, but if the larvae of two hyperparasitoids happen to meet up within the body of a parasitoid host (which probably happens more often than you might expect), it’s quite possible that one will end up parasitizing the other.34

So are there any hyperhyperhyperparasitoids? Let’s just not go there.

Back to Stingers

So now we’ve got some insects stabbing their ovipositors into other animals. That seems like a good first step towards a stinger. But a yellowjacket doesn’t sting us in order to deposit an egg under our skin (which would presumably go on to hatch into a larva that would feed off our tissues and bodily fluids before bursting forth, xenomorph-style, from our body as a fully-formed adult.) Instead, it injects venom, whose sole purpose is to send us screaming. This seems like a bit of a leap evolution-wise. How do we get from injecting eggs to injecting venom?

I read one paper that described how a hypothetical enzyme could be transformed into a venom. The paper was focused more on snake venoms, but I think it still applies here. It pointed out that some venoms are related to immune system proteins that attack bodily invaders such as bacteria, and others are related to digestive enzymes. A subject that I’ve mentioned often in my blog posts is gene duplication. This is a common type of mutation in which the section of DNA that codes for a gene gets duplicated. At first, this just means that twice as much of an enzyme or other protein encoded by the gene may get produced. But having an extra copy of a gene means that one of the copies can evolve to perform a different function without the organism losing the ability to produce the original protein. So evolution is free to adapt the extra copy for a different purpose. Another type of mutation can change the signal that tells a gene where to become active. So, in the case of a snake, a mutation may tell a gene to make its protein in the mouth instead of the pancreas.35 In the case of an insect, a digestive enzyme could be redirected to the ovipositor.

So what would happen if such an enzyme were injected into another species? Hard to say. It could do nothing; it could make the target sick or even kill it; it could produce pain with or without actual damage or damage with or without pain. It could even have an effect on the target’s behavior (besides scaring it away or making it sick, I mean). After all, the substances manufactured by insects include hormones and neurotransmitters. In any event, a random foreign chemical injected into an organism will have a much better chance of having a negative effect on that organism than a positive one, especially if the chemical is, for example, a digestive enzyme. So it’s pretty easy to see how evolution could select for venoms that produce pain and/or damage.36

Some parasitoid wasps represent an intermediate step in the evolution from ovipositor to stinger. They use their stinger to inject an egg into the body of a host, but also inject venom along with it. The venom may paralyze the host or prepare it in some other way for consumption by the wasp larva. Eventually, some parasitoids developed a separate opening at the base of the stinger for depositing the egg, freeing up the stinger to became specialized for injecting venom.37

Some Stinging Wasps

In this section, we’ll cover some of the wasps that have full-fledged stingers. One thing you’ll notice when looking at the photos of these wasps is that, in most cases, the stingers are not visible. This is because they’re retractable — they are withdrawn inside the abdomen when not in use.

Umbrella wasp (Polistes dorsalis californicus) — Umbrella wasps are a type of paper wasp, which is a common name referring to any type of wasp that makes its nest out of chewed up wood fiber — paper, in other words.

It’s not surprising that paper wasps can sting. They have a nest to defend, after all. Surprisingly, though, the sting is generally described as only moderately painful.

Umbrella wasps (Polistes dorsalis californicus)
Mission Trails Regional Park, San Diego California 6/27/20

The use of wood pulp in paper making was probably inspired by paper wasps. The first paper was made out of recycled rags of hemp, linen, cotton, or other plant fibers. When Europe suffered a shortage of cotton and linen in the sixteenth century, manufacturers started looking for alternatives. The French naturalist René Antoine Ferchault de Réaumur is credited with introducing the use of wood fiber in 1719. One of Réaumur’s most important works is the Mémoires pour servir à l’histoire des insectes in 6 volumes. My French is not exactly fluent, but I think this means something like “Reports on the History of Insects”. And, again, it was in six volumes! I think it’s safe to say that Réaumur would have been familiar with the way paper wasps make their nests.38

Milde’s tarantula hawk wasp (Pepsis mildei) — If you haven’t read my earlier post on tarantula hawks, The Stuff of Nightmares, please do so. These are some beautiful, fascinating, and gruesome insects. A female tarantula hawk hunts tarantulas. When she locates one, she paralyzes it with a sting and drags the still living tarantula into a burrow. She then lays a single egg on the abdomen of the spider and seals the burrow. When the egg hatches, the wasp larva proceeds to feed off the tarantula, eating the non-vital organs first to keep it alive and fresh for as long as possible.

I’ve had the good fortune to see a tarantula hawk dragging a paralyzed tarantula on two occasions. Here’s a couple of photos from one of those encounters.

Milde’s Tarantula Hawk Wasp (Pepsis mildei)
Sweetwater River Trail 9/8/17
Milde’s Tarantula Hawk Wasp (Pepsis mildei)
Sweetwater River Trail 9/8/17

And here’s a video of the wasp dragging its prey.

When it comes to stings, tarantula hawks are something special. According to the Schmidt sting pain index (which I’ll be discussing later in the article), the tarantula hawk has the second most painful sting of any insect!39 And we have them right here in Southern California! Fortunately, since they don’t have nests to defend, tarantula hawk wasps will not normally attack humans. In other words, don’t bother them, and they won’t bother you.

Eastern cicada-killer wasp (Sphecius speciosus) — I recently spent a week in Virginia on the east coast of the U.S. As luck would have it, the 17-year periodic cicadas (Magicicada cassinii) were emerging.40 Cicadas are extraordinary insects. There are many different species, but M. cassinii is one of the most remarkable. It spends most of its life as a larva, living underground, where it feeds on the roots of plants. At the end of 17 years, all the cicadas emerge from the ground at the same time41 and molt one last time, metamorphosing into their adult forms.

As if this weren’t incredible enough, once they finish molting, the males all start calling to attract females. They do this by vibrating a couple of membranes on their abdomens, and the sound this makes is difficult to describe. It’s a loud buzzing — really loud. Collectively, the sound can reach 100 decibels. How loud is that, you ask? One website compares it to the sound of an “ambulance siren, inside driver window down”. It can actually cause hearing damage.42

17-year cicada (Magicicada cassinii)
Richmond, Virginia 7/27/21

17-year cicadas are large, meaty insects, so naturally, they have a lot of predators. One of those predators is the eastern cicada-killer wasp (Sphecius speciosus). As the name suggests, this wasp specializes in hunting cicadas. Just as a tarantula hawk wasp stings a tarantula to paralyze it and uses it to provision a burrow with food for its offspring, a cicada-killer wasp does the same thing with cicadas. Now, you might be wondering, how can it specialize in cicadas if they only emerge once every 17-years? I wondered this, too, and I haven’t found a definitive answer. My guess is that it hunts more than one type of cicada. (Most species of cicada are not ‘periodic’ — they spend much less time as larvae and emerge at random.) If you know the answer, please share your knowledge in the comments.

Once it stings a cicada, the wasp holds it underneath her as she flies off to a previously prepared nest cell. As already noted, 17-year cicadas are big insects, so the cicada-killer has to be big, too. It’s a large, scary-looking wasp with a wicked-looking stinger. Surprisingly though, its sting is actually quite mild — less painful than that of a honeybee.45

While in Virginia, I was fortunate enough to come across a dead cicada-killer wasp lying next to the path I was walking, so I was able to get some nice closeups.

A dead Eastern cicada-killer wasp (Sphecius speciosus)
Maymont Park, Richmond, Virginia 7/25/21
Another view
The stinger
A closeup
Notice how the sting protrudes from an opening in the abdomen. I would guess that, in life, it would be kept retracted inside.

Velvet ant (family Mutilidae)46 — Velvet ants are actually wasps. The females are wingless and look a bit like large ants. Female velvet ants are parasitoids, usually of ground-dwelling bees or wasps. Because they have to spend a lot of time crawling around out in the open looking for the nests of their prey, they’ve had to evolve some serious defenses, one of which is an extremely painful sting. The sting of one species, Dasymutilla klugii, is rated three out of four on the Schmidt sting pain index. It also lasts up to 30 minutes.47 Check out my earlier blog post, Cow Killer, for more about velvet ants.

Velvet ant (Dasymutilla sp.)
Mission Trails Regional Park, San Diego County 9/16/19

Other Stinging Insects

While wasps (in the common, more restrictive, sense of the word) make up the vast majority of stinging insects, there are plenty of others among the ants and bees.

Harvester ants48 — Harvester ant is the common name for any kind of ant that collects seeds. This covers a lot of species and genera, so you might expect their stings to vary a great deal. But the following passage from Wikipedia seems to imply that they all have similar stings: “Harvester ants for their size have a rather potent venom. They inject it to [sic] their victim via sting by biting down and following up with a rapid sting from their abdomen, this causes 4-8 hours of sharp pain with effects similar to neurotoxicity such as piloerection49 and localized sweating around the area of the sting. ” If true, I suppose this is an example of similar lifestyles leading to convergent evolution.

Smooth harvester ants (Messor pergandei)
Anza Borrego Desert State Park, San Diego County 3/17/19
Smooth harvester ants (Messor pergandei) attacking a very unlucky caterpillar
Anza Borrego Desert State Park, San Diego County 3/17/19

Western or European honeybee (Apis mellifera) — Western honeybees are what most people think of when they think honeybee. They are, of course, highly social insects, and, since they have a hive to defend, one would expect them to have a fairly painful sting, and they do. On the Schmidt sting pain index, they rate a 2, which is moderately painful.50

Although I often got stung by wasps when I was a kid, as far as I can remember, I was never stung by a bee. That all changed on one of my recent hikes. A swarm of honeybees had built a hive inside the hollow of a tree. I used a friend’s phone to take a video of the swarm and was able to get quite close without being stung, resulting in a very nice video. Unfortunately, my friend’s phone malfunctioned shortly after this, and she lost the video. So the next time my hiking took me past the hive, I decided to try to get some more photos and videos.

I’m not sure why, but this time the bees seemed more aggressive. Maybe the first time, they were in the process of constructing the hive and didn’t have any eggs or young to defend, or maybe I was just too close for too long, but in any case, this time they were a lot more upset with me, and I got stung on the neck. Of course, my first thought was “What a great photo opportunity!”

I should explain. Honeybee stingers are barbed, which means that when they embed their stinger in your skin, they usually can’t pull it out again. When they fly away, the stinger is ripped out of their abdomen along with some of their guts. The bee, of course, dies from the injury. This may seem rather counterproductive, but it actually makes perfect sense from the point of view of evolution. The worker bees in a hive are all daughters of the same queen, so they share most of the same genes. As long as the hive survives, most of their genes will get passed down to future generations, regardless of the fate of any individual worker.

When the stinger is ripped out of a honeybee, the venom sac and the muscles connected to it are usually ripped out along with it. The muscles keep pumping for a while, insuring that a full dose of venom is injected into the target! So even if you swat the bee as soon as it starts to sting you, you’re still likely to suffer the full effect of its sting. Honeybees, by the way, are fairly unusual in only being able to sting once. Most stinging insects don’t leave their stingers behind and, thus, are able to sting repeatedly.51 52

So, anyway, back to the story. I left the stinger in my neck, venom muscles presumably still pumping away. (It actually didn’t hurt very much, so it wasn’t that much of a sacrifice.) When I got home, I awkwardly managed to take a few pics of the embedded stinger using my bathroom mirror to aim the camera. Here’s a couple of them. A nice photographic touch for an article on insect stings, if I do say so myself!

A honeybee sting embedded in my neck (Apis mellifera)
Mission Trails Regional Park, San Diego County 4/4/21
Another view

I didn’t think about it at the time, but I should have gotten one of the other hikers to take a video of it with their phone. Maybe it would have been possible to see the movements of the stinger as the muscles continued to pump venom. I also should have taken some photos of it after I scraped it off my neck. (I don’t know what I was thinking!) Here’s a photo someone else took of a honeybee stinger torn out of the insect’s body.

Honeybee stinger, torn from body of insect
Author:
Dejan Kreculj

This file is licensed under the Creative Commons Attribution-Share Alike 4.0 International license.

Finally (because I can’t seem to get enough of these ripped-out stingers), click here to view an amazing scanning electron microscope (SEM) image of a honeybee stinger.

Pseudo-stings

I mentioned at the beginning of the article that no male insects have stingers. That does not, however, prevent some of them from faking it. Many male insects have even evolved structures that look like stings and can be jabbed into an attacker, but that don’t inject venom. It’s an effective ruse. A quick jab from a pseudo-sting is often enough to startle even an experienced entomologist, giving the devious insect a chance to escape.53 54

The Schmidt Sting Pain Index55 56 57

No article about insect stings would be complete without discussing the Schmidt sting pain index. The toxicity of a sting can be determined experimentally, but toxicity is not closely related to pain. In fact, there are plenty of insect stings that are excruciatingly painful, but not at all toxic. Tarantula hawk wasps and velvet ants are two examples. The only way we currently have of finding out how painful an insect’s sting is is for someone to get stung by that insect and tell us. The entomologist Justin O. Schmidt set out to develop a sting pain index based on his personal experiences. The index he came up with rates stings from 0 to 4, with 0 being no pain at all and 4 being the most painful.

Many popular articles about Schmidt’s index suggest that Schmidt developed it by deliberately letting himself be stung. Schmidt himself denies this. His ratings are based on a lifetime of work in the field of entomology, during the course of which he estimates that he has (inadvertently) been stung by the majority of stinging hymenopterans. Whenever he got stung in the course of his work, he would make a note of how painful the sting was and how long the pain lasted. Obviously, the assignment of scores to stings is very subjective. That’s one reason the index only goes from 0 to 4. That way, different stings are only very broadly differentiated. If a species of wasp and a species of bee both have stings rated as 2, it doesn’t mean they’re the same or even very similar — it just means they produce roughly similar levels of pain.

Let’s take a look at some examples of Schmidt’s ratings.

Level 0. No pain in humans.

Level 1. Slight pain. Generally lasts five minutes or less. According to Schmidt, “almost pleasant, a lover just bit your earlobe a little too hard.” Examples of insects with level 1 stings are Western paper wasps, Southern fire ants, and most small bees.

Level 2. Average. Generally lasting between five and ten minutes. The majority of stinging insects have stings at this pain level. Western honeybees, yellowjackets, and bald-faced hornets have level 2 stings. Schmidt describes a yellowjacket sting as “hot and smoky, almost irreverent. Imagine W. C. Fields58 extinguishing a cigar on your tongue.”

Level 3. Significantly more painful than level 2. Lasting anywhere from one minute to half an hour. Klug’s velvet ant and the Maricopa harvester ant have stings in this category. Schmidt describes the latter’s sting as “After eight unrelenting hours of drilling into that ingrown toenail, you find the drill wedged into the toe.”

Level 4. The highest level in the index. A species of tarantula hawk wasp, Pepsis grossa, has a level 4 sting, which Schmidt deems to be “blinding, fierce [and] shockingly electric”. Another insect that gets a level 4 rating is the bullet ant (Paraponera clavata), found in Central and South America. According to Schmidt, this ant has the most painful sting of all insects. He describes it as “pure, intense, brilliant pain…like walking over flaming charcoal with a three-inch nail embedded in your heel.”

Schmidt’s descriptions of the various stings might give you the impression that his pain index isn’t meant to be taken seriously, but he actually did have a serious purpose in developing it. He wanted to collect evidence to either prove or disprove the hypothesis that the evolution of sociality in hymenopterans required the evolution of venoms that were both painful and toxic.

Pain is meant to act as a warning to an organism that it’s in danger of suffering damage — the pain of a burn lets you know that you need to take your hand off the hot plate. But since pain and toxicity aren’t closely related when it comes to stings, a painful sting can signal a danger that isn’t really there. Early hymenopterans were solitary, so just causing pain in an attacker would usually give the insect a chance to escape. Plus, solitary insects don’t provide large predators with much of a reward, so a little pain is usually enough to discourage them.

The evolution of sociality changed the equation. A large number of insects grouped together in a colony, along with their eggs and offspring, is a target much more worthy of predation. If a sting is painful, but causes no real damage, an intelligent predator will quickly realize that the meal is worth a little pain and learn to ignore the stings. So insects, the hypothesis goes, had to develop stings that were toxic, as well as painful. To study this hypothesis, Schmidt needed a way to relate the level of pain to the levels of toxicity and sociality. Thus, the Schmidt sting pain index was born.

Grad Students Are Nuts59

Another reason the Schmidt sting pain index has only four levels is that the figures represent an average over different locations on the body. For example, a honeybee sting to the back of the hand may only rate a 1.5, but a sting to the tongue from the same insect might be worthy of a 3. So, when assigning a level, Schmidt tried to estimate the average pain across a number of different body parts.

Michael Smith, a graduate student at Cornell University, decided to collect a bit more data. He proceeded to systematically test the pain levels of honeybee stings inflicted in random order to 25 different locations on his body. For six weeks, he received three test stings and two calibration stings a day until he had accumulated three stings to each location. The stings were rated on a scale from 1 to 10. The body locations chosen included “traditional” locations such as the upper arm, forearm, middle finger, thigh, upper lip, etc. Some of the more “non-traditional” locations included were the nipple, scrotum, and penis.

I would give you his results for all the various locations, but I know the only ones you really care about are the scrotum and penis. Unsurprisingly, both were “right up there near the top”.

Scorpions, Scorplings, and Scorpionism

Alongside rattlesnakes and tarantulas, scorpions are one of the most iconic animals of the American Southwest. That’s not to say they’re limited to that area — far from it — scorpions are found in tropical and temperate regions all over the globe and in just about every sort of terrestrial environment from deserts and high mountains to inter-tidal zones. They’ve also been around for a very long time. Scorpions date back at least as far as the Silurian period, around 435 million years ago.

California Common Scorpion (Paruroctonus silvestrii)
Mission Trails Regional Park, San Diego County, CA 7/1/17

Despite their long evolutionary history and wide distribution, their basic form hasn’t changed much. Like spiders, they have eight legs. At the front of the body are another pair of appendages called pedipalps, which end in large claws or pincers.

Perhaps their most distinctive feature is their long “tail” — really just a narrowing of the abdomen — ending in a large, bulbous stinger. The fact that this tail is really an extension of the abdomen can be seen by the location of the anus, which is on the last segment, just before the stinger. A scorpion will often hold its tail curved over its body with the stinger pointing forwards. It may forgo using its stinger on small prey, but when it needs to subdue a larger animal, the stinger stabs forward with blinding speed.

Although all scorpions are venomous, most are not dangerous to people. In some cases, the sting is said to be less painful than a bee sting. (This is not the case with the two most common scorpions in my area. More on that later.) Of the approximately 1750 described species of extant (living) scorpions, only around 25 have venom that is dangerous to humans. Most of these are in the family Buthidae. This includes the deadliest species in the United States, the Arizona bark scorpion (Centruroides sculpturatus). As you might expect, C. sculpturatus is found mostly in Arizona, but there’s also a small population in the southeastern corner of California.

The venom of the Arizona bark scorpion causes severe pain, usually lasting between 24 and 72 hours. If the sting is in a hand or arm, the victim may experience temporary loss of use of the appendage. In especially bad cases, the victim may experience numbness, paralysis, convulsions in the affected limb, and frothing at the mouth.

Despite the severity of these symptoms, death is extremely rare. Every year, thousands of people in Arizona are stung by C. sculpturatus, yet only 2 fatalities have been recorded in the state since 1968. This is not to say that stings should be treated lightly. Part of the reason for the low fatality rate has been the development of antivenin. If you think you’ve been stung by C. sculturatus, you should seek medical attention as soon as possible. Children, the elderly, and immuno-compromised people are most at risk.

While we’re on the subject of stings, I know you’ll want to see a scorpion in action, so here’s a video of a California common scorpion trying to sting my hiking pole. (No, I don’t regularly harass scorpions. I just wanted to see one in action, too.) 14 36

The general term for envenomation by scorpion, by the way, is ‘scorpionism’. Why we need a general term for this, I don’t know.

Milking Scorpions for Fun and Profit 44 45

No, scorpions do not produce milk. They are ‘milked’ for their venom. Why, you ask? Scorpion venom is a mixture of many different biochemical substances that have all sorts of physiological effects. It’s very possible that some of these substances will find a use in medicine. Researchers are actively exploring the use of scorpion venom for such things as treating multiple sclerosis and cancer and to help with heart transplants. It may also be useful in pain management.

One thing researchers are concerned about, though, is the possibility of addiction to scorpion venom. Yes, you read that right. It’s no secret that many of the medications currently used for pain management are extremely addictive. There’s no guarantee that medications derived from scorpion venom will be any different.

And there’s cause for concern. There is currently a craze in India of people deliberately letting themselves be stung by scorpions. Apparently, the pain is followed by a feeling of euphoria. There are even dealers on the side of the road between Delhi and Bombay that you can go to if you want to pay to be stung. Many clients seem to get addicted to the stings.

So, danger of addiction aside, how do you go about milking a scorpion? It’s actually not that hard. You cover the mouth of a container with some sort of membrane, position the membrane in front of the stinger, and give the scorpion a tap on the back. When the scorpion strikes, the stinger penetrates the membrane and leaves a tiny drop of venom clinging to the inside.

Of course, you’re not going to collect massive amounts of venom this way. Neither is it particularly safe. People who collect venom professionally (for sale or research) usually use electrical stimulation of the venom bulb to get it to release venom. Click here to watch a video of someone using this method. A robot has even been developed to speed up the process of collecting venom for cancer research.47

Despite the advent of scorpion-milking robots, scorpion venom is produced in such tiny quantities that it supposedly holds the record for being the most expensive liquid in world. A single liter will set you back over ten million dollars!60

A Very Laid-Back Predator 61 62 63

Scorpions are nocturnal predators. They usually hide in burrows during the day and come out at night to hunt. Their prey typically includes insects, spiders, and other arthropods. Some species also feed on grubs and earthworms. Really large scorpions have even been known to eat lizards and small rodents. Most species are generalists, feeding on many different things, but some specialize in one type of prey, such as burrowing spiders.

They will also eat each other. Because of this, it’s perhaps not surprising that the vast majority of scorpions are nonsocial. There are a few species that overwinter in groups, however. Presumably, those types are less inclined to cannibalism.

Scorpions are not active hunters. Mostly, they sit and wait. Their eyesight is poor, but the sensory hairs on their legs and pedipalps allow them to sense the vibrations of approaching prey.

No, Really, They Are Seriously Laid-back 64

Scorpions tend to be very abundant in arid regions — more so than is possible for most predators. They’re able to pull this off because they have unusually low metabolic rates. According to a study published in the “Journal of Experimental Biology”,65 the metabolic rates of scorpions from two genera were measured to be less than 24% that of typical terrestrial arthropods such as spiders and insects (measured at 25° C). This means they don’t require nearly as much energy and don’t have to eat as often. According to one website,66 scorpions can go up to a year without food and require less than a tenth as much oxygen as most insects.67

Another fascinating thing about scorpion metabolism is that they seem to have the ability to slow it down and quickly speed it back up when the situation demands. Click here to watch a “National Geographic” video that discusses this. While many animals slow their metabolism when hibernating or estivating, it typically takes a while for them to raise it back up to normal speed. A scorpion, however, can be resting in a lowered metabolic state and still be ready to strike at full speed if a tasty morsel wanders by.

This slow metabolism undoubtedly plays a part in their ability to survive in a wide range of environments. Although they usually live in hot, arid places, researchers have frozen scorpions overnight and then watched them thaw out and walk away!68

Where Baby Scorpions Come From 69 70

While most scorpions reproduce sexually, there are a few species that have decided to skip all the mess and fuss of exchanging genetic material. These species reproduce through a process called parthenogenesis in which embryos develop from unfertilized eggs. All the scorpions in these species are female and all the babies are clones of their mother.

In species that do reproduce sexually, the courtship starts with a dance. The male grasps the female’s claws in his own and starts leading her around. Depending on the species, the dance may involve other behaviors such as the male grasping the female’s chelicerae (mouth-parts) with his own — almost like a kiss. In fact, the behavior is sometimes called a cheliceral kiss. There may also be some juddering and, in some species, the male even injects a small amount of venom into the female to keep her calm.

The dance, which is called a “promenade à deux” (French for a “walk in twos”), is not particularly romantic. Its main purpose is probably to keep the male from being eaten while he searches for a nice, smooth place to deposit his spermatophore. This is just a capsule that contains his sperm. Once he finds a good place, he extrudes a glandular secretion that forms a stalk to which the spermatophore is attached. He then positions the female over it. Physical contact with the spermatophore causes the sperm to be ejected into her genital opening. (See the section on anatomy.) The sperm, of course, then make their way to the eggs and fertilize them.

Unusually for non-mammalian animals, scorpions give birth to live young. The eggs are retained inside the mother and the embryos are nourished in utero for a period of several months to a year, according to species. Litter sizes range from 1 to 100, but average about 25. Immediately after birth, the young scorpions (or scorplings) climb up onto their mother’s back, where they will remain for 1 to 50 days. During this time, they absorb water through their mother’s cuticle. At birth, the scorpling’s cuticle is soft. It won’t harden until after the first molt, at which time the scorpling will leave its mother and assume its mostly solitary life.

Scorpions I Have Known

Here in Southern California, we have a number of species, but, so far, I’ve only encountered three of them. The most common one seems to be the California common scorpion (Paruroctonus silvestrii).71 The adults tend to be around 7 cm (2.5 inches) long. There’s a photo of one near the beginning of the article. Here’s another one:

California Common Scorpion (Paruroctonus silvestrii)
Mission Trails Regional Park, San Diego County, CA 8/13/18

The body of this individual appears to be a bit thicker than the one in the earlier photo. This may indicate that it’s a female, as they’re supposed to have thicker bodies. I’m not an expert, though, so I don’t know for sure. The scorpion in the next two photos, however, is almost certainly female. In fact, I wouldn’t be surprised if it was pregnant. (But again, I’m not an expert.)

California Common Scorpion (Paruroctonus silvestrii)
San Diego County, CA 7/18/17
California Common Scorpion (Paruroctonus silvestrii)
San Diego County, CA 7/18/17

P. silvestrii is found throughout California and in a great variety of habitats. I usually see them in chaparral country, but I’ve seen them in the desert, as well. They can even be found on sandy coastlines and forested mountains.72

As noted earlier, the newborn or young of scorpions are called scorplings. The next few photos show a very young scorpling of P. silvestrii. I don’t know how young, but it was tiny compared to the adults — maybe a quarter of an inch or around one centimeter.

Young California common scorpion (Paruroctonus silvestrii)
Mission Trails Regional Park, San Diego County, CA 8/21/17
Young California common scorpion (Paruroctonus silvestrii)
Mission Trails Regional Park, San Diego County, CA 8/21/17
Young California common scorpion (Paruroctonus silvestrii)
Mission Trails Regional Park, San Diego County, CA 8/21/17

The sting of P. silvestrii, by the way, is reportedly quite painful. According to enonumus, writing on the website “BugGuide” 73, when he got stung on the bottom of the foot by one of them, “It just felt like someone stuck an ice pick straight through my foot!!!”

The second most common scorpion I’ve seen in Southern California is the California swollen stinger scorpion (Anuroctonus pococki).74 Here’s a few pics.

California swollen stinger scorpion (Anuroctonus pococki)
San Diego County 8/11/17
California swollen stinger scorpion (Anuroctonus pococki)
San Diego County 8/11/17

This scorpion is about the same length as P. silvestrii, but its more robust body and much larger claws make it look a bit more fearsome. This may be misleading. As a general rule, the larger the claws, the less potent the venom. This is because having large claws is an indication that the scorpion relies more on its claws to subdue prey than on its sting.75 So, despite its appearance, A. pococki could have a less painful sting than P. silvestrii. This is not a hard and fast rule, however, and anecdotal evidence says that it’s sting is still plenty painful.76

The next photo shows a closeup of A. pococki’s stinger. Note the swelling just before the business end. This structure is what inspired the scorpion’s common name. The scorpion mating process can be hazardous to males, since females sometimes have difficulty distinguishing between a potential suitor and a potential meal. Males of some species get around this problem by stinging the female to calm her down. Of course, it wouldn’t do to inject a full load of venom into the female as killing her would tend to defeat the whole purpose of mating. Supposedly, the swelling is there to keep the male from overdoing things — maybe by preventing him from stabbing too deeply? I’m not quite sure how it’s supposed to work.77

Closeup of the stinger of a California swollen stinger scorpion (Anuroctonus pococki)
San Diego County 8/11/17

The third and final scorpion species that I’ve encountered in Southern California is Stahnkeus subtilimanus.78 79 If it has a common name, I haven’t been able to find it. I’ve only seen this scorpion once. I was hiking in the desert in winter and I turned over a rock, hoping to find something interesting to photograph. I was successful. It’s around the same length as the other two.

Stahnkeus subtilimanus
Jojoba Wash in Anza Borrego State Park, San Diego County, CA 1/19/20
A closer look

Lighting ‘Em Up 80 81

The easiest way to find a scorpion is: (a) look for them when they’re most likely to be out and about — namely, at night in the middle of summer — and: (b) use a black light. Black light or UV radiation makes scorpions glow a blue-green color.

Just in case you’re too young to remember all the black light paraphernalia of the 60’s and 70’s, a black light is just a light bulb (or, more likely these days, a grid of LEDs) that emits light in the ultraviolet or UV range of wavelengths, which is invisible to the human eye. When certain materials are exposed to UV light, they absorb some of it and re-emit it at lower wavelengths that are visible to us. Various creatures have bits that glow when exposed to UV light, but scorpions are unusual in that their entire bodies glow.

Black light flashlights are relatively cheap and can easily be ordered online. It’s worth the small investment if want to experience the thrill of seeing a scorpion in the wild. And they’re quite effective. It’s possible that you may find yourself standing around at night under the light of an ordinary flashlight with nary a scorpion in sight. You turn off your regular flashlight and turn on your black light and, suddenly, they’re all over the place! Scorpions are not uncommon in the American Southwest and they’re not hard to find if you know where (and when) to look for them. A black light certainly helps with that endeavor.

That said, it’s perfectly possible to spot a scorpion without using a UV flashlight. In fact, to be honest, I’ve never found one that way. I spotted my first scorpion while hiking at night with a regular headlight for illumination. After I saw my first one, I had no problem spotting more. Your eyes just learn what to look for. Note: Unless you’re willing to look under rocks for them, you will need to hike at night to find them. I have seen one or two in daylight, but it’s rare. And it has to be pretty warm. Scorpions, at least the ones in Southern California, only come out when it’s toasty.

California common scorpion (Paruroctonus silvestrii) glowing under a black light
Mission Trails Regional Park, San Diego County, CA 7/1/17
The same scorpion glowing a lot more brightly. (Either I replaced the batteries in my black light or I adjusted the aperture setting of my camera. Probably the latter.)

How and Why They Light Up 82 83

You may be wondering what causes a scorpion to glow under a black light. The exoskeleton or cuticle of a scorpion contains several chemicals that fluoresce when exposed to UV radiation. These chemicals are present in the hard, thin out layer of the cuticle called the hyalin layer. Interestingly, a scorpion is not able to fluoresce immediately after molting. It starts to fluoresce again only after the new cuticle hardens. This could mean that the substance that causes the glow is produced as a byproduct of the hardening or it could mean the substance is not secreted until shortly after the molt.

So what are these chemicals you ask? Well, if you really want to know, they are β-carboline, 7-hydroxy-4-methylcoumarin, and some kind of phthalate ester that was only recently isolated from scorpion cuticle. You probably know about as much about these chemicals as I do, but I can tell you that at least one of them must be powerful and long-lasting. When a scorpion is preserved in alcohol, the alcohol itself will eventually begin to fluoresce. More remarkably, cuticle preserved in fossil scorpions hundreds of millions of years old still fluoresces under UV light!

Perhaps more interesting than how a scorpion fluoresces is why do they bother? I mean, what’s the point of all that glowing? The answer to that is still up in the air. There are a number of theories, but the one that seems to be backed up by the most experimental evidence is that it helps them hide from the moon.

Perhaps I should explain. It turns out that some UV light is present in moonlight and scorpions glow dimly when exposed to it. The theory is that converting the UV light to visible light allows the scorpion to detect it. In other words, it’s able to tell when it’s being illuminated by the light of the moon. Since scorpions have many predators, they prefer to avoid this. So a scorpion may remain in its burrow or keep to the shadows when the moon is visible.

One really odd thing about scorpions is that they have photosensitive elements in their tails. These elements are most sensitive to green light. The theory seems to be that the tail is used to detect the blue-green glow emitted by the cuticle. The brighter the glow, the brighter the moon. So the hyalin layer in combination with the photosensitive elements in the tail form a whole-body UV detector that helps the scorpion hide more effectively.

The Various Parts and How They Work (Scorpion Anatomy) 84 85 86

The body of a scorpion is divided into three main parts — the prosoma, the mesosoma, and the metasoma. The prosoma (colored green in figure 1) is also called the cephalothorax. This term may be inappropriate, however, since in other arthropods it’s generally used for a body part that forms from a fusion of the head segment (the cephalon) with the following segment (the thorax) and there is no evidence that scorpions or their ancestors ever had a body part corresponding to a thorax. So prosoma may be the more correct term. The mesosoma and metasoma together are called the opisthosoma.

Figure 1. Unidentified Scorpion
This work has been released into the public domain by its author, Pearson Scott Foresman. This applies worldwide.
In some countries this may not be legally possible; if so:
Pearson Scott Foresman grants anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.

Legend for Figure 1:

  • Cephalothorax or prosoma – The area in green
  • 1 to 7 – Segments of mesosoma (abdomen) in tan
  • M1 to M5 – Segments of metasoma (tail) in pink
  • Opisthosoma – The abdomen and tail together. Includes the mesosoma (in tan) and metasoma (in pink).
  • P – Pedipalps
  • T – Telson (venom bulb and stinger)
  • C – Chelicerae (mouthparts)
Figure 2. Dorsal (on left) and ventral (on right) anatomy of a generic scorpion
Author: Pietrovicari
This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license.

Legend for Figure 2:

  • Ch – Chelicerae (mouthparts)
  • LE – Left eyes
  • ME – Median eyes
  • PD – Pedipalps
  • PR – Prosoma or cephalothorax
  • MS – Mesosoma
  • MT- Metasoma
  • OP – Opisthosoma
  • GO – Genetal opercula (covers the gonopore or genital opening) 
  • PT – Pectins or pectines

The prosoma usually has one central pair of eyes on top. Often, there will also be two or three pairs of lateral eyes near the front edge. None of these eyes form sharp images, but the central pair is among the most light-sensitive of any animal. Scorpions are believed to use the shadows cast by starlight to navigate at night! The lateral eyes or ocelli are only used to detect changes in light intensity. They help the scorpion maintain its daily cycles.

In the photo below, you get a good view of the pair of central eyes. There is a cluster of lateral eyes visible, as well.

California common scorpion (Paruroctonus silvestrii)
San Diego County 8/12/18

Here’s a better view of the lateral eyes. It looks like this species has three pairs grouped very closely together.

California common scorpion (Paruroctonus silvestrii)
San Diego County 8/12/18

Four pairs of walking legs are attached to the underside (or ventral surface) of the prosoma. Extending from the front of the prosoma are a pair of appendages called pedipalps, which end in large claws. And between the pedipalps are a pair of pincer-like appendages called chelicerae that function as mouthparts, tearing up food. Prey is caught with the claws, passed to the chelicerae, and, from there, the shredded parts are passed into the preoral cavity. Digestive juices secreted into the preoral cavity partially digest and liquefy the food. Only liquefied food is passed on to the rest of the digestive tract. Parts that cannot be liquefied are filtered out and expelled from the preoral cavity.

The next photo shows the chelicerae of a California common scorpion. Its lateral eyes are also visible.

California common scorpion (Paruroctonus silvestrii)
San Diego County 8/12/18

In the photo below, we can see the rather vicious-looking mouth-parts of a California swollen stinger scorpion. The central and lateral eyes are visible on the prosoma.

California swollen stinger scorpion (Anuroctonus pococki)
San Diego County 8/11/17

Behind the legs on the bottom of the prosoma are the genital opercula (GO in figure 2), which cover the openings to the genitals. Behind those are a pair of pectens (or pectines). These are comb-like appendages that serve as sense organs. Some species use them to locate prey. Males also use them to detect pheromones released by females. One way to tell males from females is that male pectines are larger and have more and larger teeth.

As noted earlier, the tail or metasoma is really an extension of the abdomen. The anus is located on the last segment of the metasoma, right before the telson. The telson is a venom bulb with a wicked stinger attached. This bulb contains two venom sacs which inject venom through a pair of openings on each side of the stinger, just before the tip.

On the ventral (bottom) side of mesosomal segments three through six are three pairs of book lungs. The ancestors of scorpions were aquatic and book lungs are evolved from gills. If you think of them as gills that have been enclosed inside the body to keep them from drying out, you probably won’t be far wrong.

And finally, the following photo shows a claw of a California swollen stinger scorpion. You can see that there are a great many “hairs” or setae sprouting from it. Setae are sensory hairs. Most of them are probably used to feel things that come in contact with the claw, but some of them are a special type of setae called trichobothria. These sprout from the centers of tiny circular openings. The second photo below shows a blowup of a section of the claw with several trichobothria indicated with red arrows. The trichobothria are used to detect airborne vibrations and currents.87

Claw of a California swollen stinger scorpion (Anuroctonus pococki)
San Diego County 8/11/17
A closeup showing several tricobothria

The Grasshopper Mouse: A Mouse That Eats Scorpions 88 89 90

Most mice are vegetarians. Grasshopper mice in the genus Onychomys are an exception. They feed on a wide range of animals including insects (such as the eponymous grasshopper), spiders, snakes, centipedes, and even other species of mice. They also feed on scorpions. The southern grasshopper mouse (Onycomys torridus), in particular, routinely kills and eats Arizona bark scorpions (Centruroides sculpturatus). This is especially impressive given that, as already mentioned, this is the most venomous scorpion in the United States.

It looks so normal: Southern grasshopper mouse (Onychomys torridus)
Author: National Park Service
Source: Rodents – Tonto National Monument

So how does this rather unassuming-looking mouse manage this? A scorpion’s venom is a cocktail of chemicals that have various usually not very good effects on the animals it stings. One of these toxins has the job of causing intense pain. Researchers have found that the southern grasshopper mouse has a single mutation that changes the way this toxin interacts with pain neurons in such a way that, instead of exciting the neurons, it shuts them down, essentially anesthetizing the mouse. When it’s first stung, the mouse feels a quick stab of pain, but then it goes numb and is able to continue to feed with impunity.

Of course, this doesn’t explain how the mouse is able to handle all the other toxins in the venom. (There seems to be around 6 in total). Apparently, the grasshopper mouse has evolved resistance to those, as well, but researchers haven’t figured out the details yet.

There’s lots more I could write about this fascinating rodent, but this is a post about scorpions, so that will have to wait for a future article.

Scorpion Evolution 91 92 93 94 95

First, a quick bit of taxonomy. Scorpions are arthropods (phylum Arthropoda), which includes all animals with a segmented body, jointed legs, and an exoskeleton. Within Arthropoda, they are included in the subphylum Chelicerata, which groups together all animals that have chelicerae. Within Chelicerata, they are usually included in the class Arachnida, along with spiders, mites, ticks, and the like. (There is some debate about whether scorpions are really arachnids. We’ll get into that later.) Finally, scorpions themselves form the order Scorpiones.

To sum up, here’s the last paragraph in heirarchical form:

Arthropoda –> Chelicerata –> Arachnida –> Scorpiones

Arthropods were among the earliest animals and were part of the famous Cambrian explosion around 541 million years ago, which marks the beginning of the Cambrian period. All the major animal forms appear in the fossil record during this period. The last common ancestor of arthropods has not been found, but it’s been reconstructed as a modular organism in which each module or segment had a single pair of legs and an armor plate. It would have evolved during the period immediately preceding the Cambrian, the Ediacaran.

The Chelicerata evolved around 445 mya from marine arthropods. (All animal life was aquatic at this time.) Scorpions were among the earliest Chelicerata to evolve. Fossil scorpions as old as 430 million years have been found.

Scorpions are closely related to the extinct eurypterids (order Eurypterida) or sea scorpions, but the exact relationship is not known. Some scientists believe that scorpions evolved from eurypterids. Other scientists believe they both evolved from a common ancestor. Either way, the eurypterids are a fascinating group of animals and deserve a section of their own…

The Eurypterids

Sea scorpions go back at least to the Ordovician period around 467.3 mya. They may have evolved as early as the late Cambrian. The photos below attest to their obvious similarities to the true scorpions.

Reconstruction of a fossil sea scorpion making Palmichnium tracks.
Author: James St. John
This file is licensed under the Creative Commons Attribution 2.0 Generic license.
A reconstruction of life on an ancient seafloor during the Silurian, including two species of eurypterid
Author: James St. John
This file is licensed under the Creative Commons Attribution 2.0 Generic license.
Reconstruction of genus Eurypterus exhibited in Smithsonian National Museum of Natural History: Hall of Fossils
Author: Ryan Somma
This file is licensed under the Creative Commons Attribution-Share Alike 2.0 Generic license.

The earliest eurypterids lived in marine environments, but many later species inhabited brackish or fresh water. It’s possible they may have even invaded the land, although this is not known for certain. Some studies suggest that a dual respiratory system was present in some species, which would have allowed them to breathe both in water and air. But this, too, is not certain.

Eurypterids were very successful in their time and diversified to fill many niches. The smallest were less than an inch long. The largest known eurypterid, Jaekelopterus, may have reached 2.3–2.6 metres (7.5–8.5 ft)! It would have been the apex predator of the Early Devonian (roughly 419 to 393 mya).

Size of two species of Jaekelopterus
Author: User:Slate Weasel
This image is in the public domain.

Despite their similarities, it’s important to re-emphasize that scorpions may not have evolved from eurypterids. It’s quite possible that the two groups split from a common, unknown ancestor. There just isn’t enough fossil evidence to settle the matter one way or the other.

Scorpion Evolution Continued…96

The first scorpions were either marine or amphibious. The earliest fossils are associated with other marine organisms, so it’s likely they were entirely marine. They appear to have had gills and their legs appear to have been adapted to a bottom-dwelling lifestyle. The first fossils of scorpions that were definitely terrestrial are from the Upper Devonian or Lower Carboniferous between 370 and 323 mya. The transition from external book gills to internal book lungs is what made their colonization of land possible.

Early scorpions (as well as eurypterids) had compound eyes. These evolved into the simple eyes and ocelli of modern scorpions. (See my earlier blog post The Story of Eyes: Part 1.)

Ancient scorpions included some impressively large specimens. The current record holder, Brontoscorpio anglicus, apparently grew to around a meter long! (The only fossil we have of B. anglicus is an “incomplete single free finger of a pedipalp, almost 10 centimetres (3.9 in) long”,97 so this is necessarily an estimate.)

An artist impression of Brontoscorpio
Author: Tim Bertelink
This file is licensed under the Creative Commons Attribution-Share Alike 4.0 International license.

I mentioned earlier that there is some debate over whether or not scorpions should be classified as arachnids. The fossil record of scorpions is not terribly good and embryological and morphological studies have not been able to establish a clear relationship between the two groups. Some scientists believe that scorpions do belong in Arachnida and may even be the ancestors of other members of the group. Others believe that they don’t belong in Arachnida and instead are members of the class Merestomata. In this view, their closest living relatives would be the horseshoe crabs.

Living Fossils? Not So Much

It used to be very common for certain plants and animals to be described as “living fossils” — generally because their outward appearance hasn’t changed much from their distant ancestors. Although you’ll still hear the term used occasionally, modern scientists prefer to avoid it. The fact is, all organisms change over time, even if the changes aren’t immediately obvious.

Scorpions are a good example. A paper in “Nature” 98 describes a study of the genome of the scorpion Mesobuthus martensii. According to this paper, “Although M. martensii appears to evolve conservatively, it has a greater gene family turnover than the insects that have undergone diverse morphological and physiological changes, suggesting the decoupling of the molecular and morphological evolution in scorpions.” In other words, while the scorpion’s overall form has been conserved, physiological features, such as basic metabolic pathways, signalling pathways, and venom makeup, have evolved at a remarkable pace. So much for scorpions being living fossils!

It’s interesting to note that the concept of “decoupling” is also used in modern computer programming, especially object oriented programming. I won’t go into a lot of detail, but the idea is that programmers try to design the various “entities” — usually classes — in a program in such a way that any given entity can be redesigned without having to modify other entities that use it or depend on it. More and more, biologists are finding that evolution also uses decoupling to improve the “evolvability” of organisms. The decoupling of morphology and physiology in scorpions is a nice example. Evolvability is an important concept in modern evolutionary theory, but that’s a topic for another time.

Don’t try this at home.